Marble Care

All natural stones have been formed over thousands of years and mother nature has ensured every piece is unique in its own way. There is perfection in the imperfection. Irregularities such as little fissures and holes may be present. Variation is a characteristic of natural stone. Colour and veining may vary from piece to piece. 

Please do! 

• We strongly recommend the House of Stone Protective Sealant to prevent staining and to repel spills on the surface. This will also help preserve your product and ensure longevity. 
• Handle your unique piece with care. 
• Clean up spills immediately using a soft cloth with warm water and mild detergent to minimise staining or marking. 
• Use cleaning products specifically formulated for natural stone. 
• Dry immediately after cleaning. 
• Use trivets or mats under hot dishes and cookware. 
• Handwash only. 

Please don't! 

• Take care not to drop your piece. It will lead to chipping, cracking or breaking. 
• Never use bleach or abrasive cleaners as it may tarnish the surface. 
• Lemon, vinegar and other acidic products can corrode and stain natural stone. 
• Never place hot items directly onto the surface of natural stone. Sudden heat may lead to cracking. 
• Avoid using strong pigments such as turmeric as it may leave stains, even when sealed.  
• Do not place in a microwave or dishwasher.  

House of Stone Protective Sealant

Application Instructions

Before using the House of Stone Protective Sealant, make sure the surface is clean, dry and free of existing sealers or products.  

1) Apply a thin layer evenly using a microfiber cloth or foam brush. 

2) Wait at least 30 minutes before applying an additional and final coat using the same technique.  

3) After 2 hours, test area with water droplets. If area repels droplets the product is ready for use. If not, apply an additional coat using the same technique.  

4) Surface is ready to use after 2 hours from final coat. 

Safety Data Sheet can be found here